Evaporators
Evaporators
Promac provides in cooperation with Fontemar low maintenance and durable evaporators with unique designs and high heat transfer rates. Evaporator-based fresh water systems which utilise waste heat from the main engine or an auxiliary engine. Capacities ranging from 1.500 up to 30.000 litres per 24 hours. Historic proven concept, easy to handle and energy saving techniques are the key-words for success.
The Promac TCS range of evaporators includes 14 models in standard. The evaporator, can be installed on-board vessels and land-based facilities. The basic operation is founded on the processing of salt water into fresh water, through the principle of vacuum distillation, using a heat source between 60°C and 90°C, normally from the cooling water of the engines. Promac TCS evaporators are installed on steel frames, ready for installation in the engine room on-board of ships.
When seawater is heated under vacuum the water will vaporize at a temperature of only 40 ° C. This principle, heating of water under vacuum, underlies the operation of the evaporator. Vapor to the evaporator used to produce a heat source, often residual heat from the diesel engines. The evaporator is fed with a controlled amount of seawater in the heat exchanger. Here the seawater is heated and evaporated under vacuum.
The part of the sea water which has evaporated will be discharged continuously. The vaporizer uses the heat of the fresh water cooling system of the engines of the ship. This relatively warm cooling water that can reach a temperature of 75-90 ° C, passes through the heat exchanger. The production will be at maximum when the temperature varriation between the enrty and exit of the equipment is 8°C.Evaporator TCS 1
The Freshwater generator Promac TCS evaporators are designed to work in both, marine and terrestrial facilities. Its operation is based on the processing of vacuum distillation, using a heat source between 60 and 90 degrees Celcius, which can come from the cooling of the engines of the vessel. The TCS 1 has a production of 2000 liters a day.
Evaporator TCS 1.5
The Freshwater generator Promac TCS evaporators are designed to work in both, marine and terrestrial facilities. Its operation is based on the processing of vacuum distillation, using a heat source between 60 and 90 degrees Celcius, which can come from the cooling of the engines of the vessel. The TCS 1.5 has a production of max 3000 liters a day.
Evaporator TCS 2.0
The Freshwater generator Promac TCS evaporators are designed to work in both, marine and terrestrial facilities. Its operation is based on the processing of vacuum distillation, using a heat source between 60 and 90 degrees Celcius, which can come from the cooling of the engines of the vessel. The TCS 2.0 has a production of max 4000 liters a day.
Evaporator TCS 2.5
The Freshwater generator Promac TCS evaporators are designed to work in both, marine and terrestrial facilities. Its operation is based on the processing of vacuum distillation, using a heat source between 60 and 90 degrees Celcius, which can come from the cooling of the engines of the vessel. The TCS 2.5 has a production of max 5000 liters a day.
Evaporator TCS 3.0
The Freshwater generator Promac TCS evaporators are designed to work in both, marine and terrestrial facilities. Its operation is based on the processing of vacuum distillation, using a heat source between 60 and 90 degrees Celcius, which can come from the cooling of the engines of the vessel. The TCS 3.0 has a production of max 6000 liters a day.
Evaporator TCS 4.0
The Freshwater generator Promac TCS evaporators are designed to work in both, marine and terrestrial facilities. Its operation is based on the processing of vacuum distillation, using a heat source between 60 and 90 degrees Celcius, which can come from the cooling of the engines of the vessel. The TCS 4 has a average production of 8.000 liters a day.
Evaporator TCS 6.0
The Freshwater generator Promac TCS evaporators are designed to work in both, marine and terrestrial facilities. Its operation is based on the processing of vacuum distillation, using a heat source between 60 and 90 degrees Celcius, which can come from the cooling of the engines of the vessel. The TCS 6 has a average production of 12.000 liters a day.
Evaporator TCS 8.0
The Freshwater generator Promac TCS evaporators are designed to work in both, marine and terrestrial facilities. Its operation is based on the processing of vacuum distillation, using a heat source between 60 and 90 degrees Celcius, which can come from the cooling of the engines of the vessel. The TCS 8 has a average production of 16.000 liters a day.
Evaporator TCS 10.0
The Freshwater generator Promac TCS evaporators are designed to work in both, marine and terrestrial facilities. Its operation is based on the processing of vacuum distillation, using a heat source between 60 and 90 degrees Celcius, which can come from the cooling of the engines of the vessel. The TCS 10 has a average production of 20.000 liters a day.
Evaporator TCS 12.0
The Freshwater generator Promac TCS evaporators are designed to work in both, marine and terrestrial facilities. Its operation is based on the processing of vacuum distillation, using a heat source between 60 and 90 degrees Celcius, which can come from the cooling of the engines of the vessel. The TCS 12 has a average production of 24.000 liters a day.with a max of 30.000 Liters per day.
Evaporator TCS 15.0
The Freshwater generator Promac TCS evaporators are designed to work in both, marine and terrestrial facilities. Its operation is based on the processing of vacuum distillation, using a heat source between 60 and 90 degrees Celcius, which can come from the cooling of the engines of the vessel. The TCS 15 has a production of max 30.000 liters a day.
